My Dashboard


My Profile

Customer information

Building automation
Tomas Wahlström

tel: +46 (70) 8719741

Industri Automation
Therése Fagerström
tel: +46 (8) 728 14 48

Webmaster

|
  1. Industry Automation
  2. Simatic TIA Portal
  3. TIA-PRO1 - Description

Simatic TIA Portal programmering 1 för plc (TIA-PRO1)

Short Description

  • The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC STEP 7 and SIMATIC WinCC. In this first part of the SIMATIC TIA Portal programming training, we teach you the handling of the TIA Portal, basic knowledge about the structure of the SIMATIC S7 automation system, configuration and parameterization of hardware, and the basics of standard PLC programming. You also receive an overview of HMI and PROFINET IO.

Objectives

  • After attending the course, you can do the following:
    • Understand the fundamentals of interaction of the TIA components
    • Solve simple programming tasks using elementary STEP 7 instructions
    • Reliably operate the "TIA Portal" engineering platform
    • Program simple plant functions with basic STEP 7 instructions in the ladder
  • diagram (LAD) or function block diagram (FBD)
    • Perform simple commissioning of TIA components
  • You can deepen your theoretical knowledge with numerous practical exercises on a TIA system model. This consists of a SIMATIC S7-1500 automation system, ET 200SP distributed I/O, Touchpanel TP700, and a belt model.
Type Face-to-face training
Duration 4 days
Language sv

Target Group

  • Programmers
  • Commissioning engineers
  • Engineering personnel

Content

  • System overview Simatic S7
  • Introduction to the TIA Portal
  • Configuration and parameterization of hardware
  • Introduction to Profinet communication
  • Program editor
  • Block types and structured programming
  • Variables, addressing and data types
  • Logical functions
  • Comparators, counters and timers
  • Diagnostics and program test
  • Storage of data in memory and data block
  • Handling of analogue values
  • Introduction to HMI/WinCC Comfort

Prerequisites

  • Programmers that are experienced with PLC and PLC programming.

Note

  • Utbildningen genomförs på svenska med material på engelska. Praktiska övningar genomförs på Simatic S7-1500-system tillsammans med ET 200SP I/O och Comfort Panel.

Fee

19,300 SEK

Downloads

Participant feedback

We ask the participants in our training to evaluate it on a set of criteria. Their average feedback on the “overall satisfaction” we publish for your information.

full starfull starfull starfull star half star (4.4 of 5 for 84 ratings)