SITRAIN South Africa, Siemens Training

Title and Description	Language	Country
Face-to-face training Master Drive 6SE70 - Service and Commissioning (DR-MD-1H) DR-MD-1H (Old Course Code - SD-MDVC) This compact course provides comprehensive knowledge of the control version Vector Control. This course is especially suitable for... en ZA	en	ZA
Face-to-face training S7 Service & Maintenance Part 3 (ST-7SERV3) ST-7SERV3 S7 Service & Maintenance Part 3 (Siemens Certified Service Technician) The third part of the SIMATIC S7 service training is based on the knowledge of the... en ZA	en	ZA
Face-to-face training PCS 7 OS-Engineering (ST-PCS7OSE) PCS 7 OS-Engineering As SIMATIC PCS 7 Engineer you will learn in this course the potential of the SIMATIC PCS 7-process control software with focus on OS configuration... en ZA	en	ZA
Face-to-face training Sinamics S120 Service and Commissioning (DR-S12-PM) DR-S12-PM (Old Course Code - DR-SNS-SI) This training course encompasses the basics of the SINAMICS S120 drive system. It provides the technical knowledge required for... en ZA	en	ZA
Face-to-face training S7 Programming Part 2 (ST-7PRO2) S7 Programming Part 2 Aims and Objectives Advanced programming techniques. This course is directed at users with engineering experience in the fields of configuring,... en ZA	en	ZA
Face-to-face training PCS 7 AS-Engineering (ST-PCS7ASE) As SIMATIC PCS 7 Engineer you will learn in this course the potential of the SIMATIC PCS 7-process control software with focus on AS-Engineering. As important topics for... en ZA	en	ZA
Face-to-face training S7 Programming Part 1 (ST-7PRO1) S7 Programming Part 1 Aims and Objectives This course is directed at users with engineering experience in the fields of configuring, design & commissioning of SIMATIC S7... en ZA	en	ZA
Face-to-face training SIMOTION Systems & Programming Course (MC-SMO-SYS) (MC-SMO-PM) SIMOTION Systems & Programming Course You will learn how to configure and start up the SIMOTION Motion Control system with the associated drives and visualization... en ZA	en	ZA
Face-to-face training SIMATIC WinCC Unified 1, System Course. (TIA-UWCC1) SIMATIC WinCC Unified as a visualization system in the TIA Portal. The system impresses with its use of native web technologies, which you will become acquainted with in... en ZA	en	ZA
Face-to-face training Introduction to PLC (Incl. LOGO) (ST-PLCINTR) Introduction to PLC The training aim of this course is to teach the basic instructions of a PLC with a strong element of practical, hands-on simulation of industrial... en ZA	en	ZA
Face-to-face training SIMATIC Programming 3 in the TIA Portal (TIA-PRO3) (TIA-PRO3) • The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC STEP 7 and SIMATIC WinCC. The third part of... en ZA	en	ZA
Face-to-face training Fundamentals of AC Drives - inclusive of Micro Master 440 (DR-DRV-FUN) Fundamentals - Inclusive of Micro Master MM440 This course provides extensive information for activities in the field of electrical drive technology. The topics are... en ZA	en	ZA
Face-to-face training Simocode Pro - Commissioning and Diagnostics (SD-SIMOPRO) SIMOCODE pro Wiring, Engineering, Commissioning and Diagnostics The training objective is to become familiar with the devices and how the SIMOCODE pro system functions.... en ZA	en	ZA
Face-to-face training Introduction to Profibus, Ethernet, Profinet (SCT-S7NETS) Introduction to Profibus, Ethernet, Profinet Aims and Objectives This course provides an introduction to MPI, PROFIBUS and Actuator-Sensor Interface (AS-i) networks... en ZA	en	ZA
Face-to-face training S7 - 1200 Systems Course (TIA-MICRO) S71200 Micro Course Aims and Objectives This training imparts knowledge about the essential basics of the automation system SIMATIC S7-1200 and the engineering system... en ZA	en	ZA
Face-to-face training S7 Service & Maintenance Part 1 (ST-7SERV1) S7 Service & Maintenance Part 1 This course is directed at users & maintenance personnel of SIMATIC S7 programmable controllers The SIMATIC STEP 7 System Family. STEP 7... en ZA	en	ZA
Face-to-face training S7 Programming Course - Part 3 (ST-7PRO3) ST-7PRO3 - S7 Programming Part 3 (Siemens Certified Programmer) The third part of the SIMATIC S7 programming training is based on the knowledge of the SIMATIC Manager... en ZA	en	ZA
Face-to-face training S7 Service & Maintenance Part 2 (ST-7SERV2) S7 Service & Maintenance Part 2 Aims and Objectives This course provides the fault finding techniques required for maintenance and in depth exercises with standard... en ZA	en	ZA
Face-to-face training Sinamics DCM 6RA80 Diagnostics and Service (DR-DCM-PM) (DR-DCM-DG) DR-DCM-PM (Old Course Code - DR-DCM-SI) This training course shows you how to adapt the parameter settings for the converter in line with the application and DC motor.... en ZA	en	ZA
Face-to-face training SIMATIC PCS 7 Systems Course (ST-PCS7SYS) PCS7 Systems In this course you will learn how to implement the diversity of engineering possibilities in a structured and efficient way with SIMATIC PCS 7 process... en ZA	en	ZA
Face-to-face training WinCC (ST-WINCC) WinCC Aims and Objectives This course will enable engineering and maintenance personnel to design and configure automation systems using Siemens Windows Control Center... en ZA	en	ZA
Face-to-face training SIMATIC PCS 7 Service 1 (ST-PCS7SR1) SIMATIC PCS 7 Service 1 The course is designed for personnel whose main area of activity is the care, servicing and maintenance of existing installations with SIMATIC... en ZA	en	ZA
Face-to-face training Process Instrumentation FUNDAMENTALS (PI-FUN) Process Instrumentation FUNDAMENTALS This course teaches participants the basic principles of process instrumentation, Control in process industries and the regulation... en ZA	en	ZA
Face-to-face training SIMATIC Service 1 in the TIA Portal (TIA-SERV1) (TIA-SERV1) • The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC STEP 7 and SIMATIC WinCC. In this first part... en ZA	en	ZA
Face-to-face training SINAMICS G120 – Parameterizing and Commissioning (DR-G12-PM) SINAMICS G120 Wiring, Commissioning and Diagnostics SINAMICS G120 allows the variable-speed operation of induction motors to drive pumps, fans, conveyor systems and many... en ZA	en	ZA

1 2 3 next

10 25 50

SITRAIN South Africa

My Dashboard

My Profile

MyTraining

Vanessa Bonhomme

Search

Filter by