|
Treinamento presencial
Switching and Routing in Industrial Networks with RUGGEDCOM (Face-to-face Training) (IK-SWIROR)
Ethernet has found its way into the industrial environment. A high degree of reliability and throughput rates are demanded from industrial networks. At the same time a...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Flow Technology – SITRANS FM MAG8000 (SC-PI-FMAG)
Get closer to our high accuracy and reliable smart water flowmeters!
The SITRANS FM MAG 8000 portfolio features a basic version for general water applications or an...
en
DE
|
en
|
DE
|
|
Treinamento Online
SINUMERIK PAL-Seminar C - Measurement and Parameters (Online Training) (NC-PAL-C)
Our PAL seminars teach the use of PAL CNC examination controls with a 3D machine room and machining simulation. The CNC training in DIN/ISO code is comprehensively...
de
DE
|
de
|
DE
|
|
|
Treinamento presencial
Optical Identification Technologie and Practice (Face-to-face Training) (ID-OID-TP)
Whether production or logistics, for individualized mass production and the requirements for tracing goods, identification of products is essential. For state-of-the-art...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Siemens Certified Automation Engineer for SIMATIC Safety – Configuration and Programming (Face-to-face Test) (CPT-TIASAF)
In this course you can proof your knowledge about configuring and programming fail-safe controllers and receive certification as an Automation Engineer for SIMATIC...
en
DE
|
en
|
DE
|
|
|
Treinamento Online
Online-Training - Aufbaukurs für Elektroentwickler (SC-S-EXEL)
The requirements of the European directives for use in potentially explosive atmospheres are the main topics of the course. This course is aimed at electrical designers...
de
DE
|
de
|
DE
|
|
|
Treinamento Online
Online-Training - Refresher ULTRMAT 23 (SC-G-U23R)
This refresher trainings are intended to follow up, refresh and extend the participants’ existing knowledge and skills acquired during initial basic training "ULTRAMAT...
de
DE
|
de
|
DE
|
|
|
Treinamento presencial
ANSI-C in the SIMATIC World, Introduction (Face-to-face Training) (ST-SIMACE)
This course shows you the possible applications of C scripts in the SIMATIC WinCC and SIMATIC PCS 7 automation systems and familiarizes you with the fundamentals of the...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
CALOMAT 6 intensive Thermo conductivity of gases (SC-G-CAL)
Commissioning and operation of CALOMAT 6, Diagnostics, calculation and display of results and correction via measurements of other gas analyzers.
Service...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
VASS 6 OEM Workshop for Beginners (Face-to-face Training) (CT-VAS6OEE)
Participants will gain proficiency in the VASS standard with emphasis on the following:
Installation and configuration of PROFINET and PROFIsafe components
Gaining...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Siemens Certified Service Technician Level 1 in TIA Portal (Face-to-face Test) (CPT-FAST1)
You will deepen your theoretical knowledge with numerous practical exercises on a SIMATIC plant model on which you also take the examination. This consists of a SIMATIC...
en
DE
|
en
|
DE
|
|
|
Treinamento Online
BRAUMAT / SISTAR RCS, Advanced course (Online Training) (TIA-BRAURCS)
In order to provide you with the best possible support and training in your personal learning environment (own office/home office), we have implemented selected courses...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Use of Sonic- and Process Intelligence in Practice (SC-PI2-SPI)
Teaching of knowledge for signal evaluation with ultrasonic, radar and GWR level measuring devices.
Service personnel, technicians and engineers responsible for...
de,
en
DE
|
de,
en
|
DE
|
|
|
Treinamento presencial
SIMATIC WinCC Unified 3, Advanced Course (Face-to-face Training) (TIA-UWCC3)
SIMATIC WinCC Unified as a visualization system in the TIA Portal. The system impresses with its use of native web technologies, which you will become acquainted with in...
de
DE
|
de
|
DE
|
|
|
Treinamento Online
Online-Training - Advanced Course for Electrical Developers (SC-S-EXEL)
The requirements of the European directives for use in potentially explosive atmospheres are the main topics of the course. This course is aimed at electrical designers...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Virtual Commissioning for Machines (Face-to-face Training) (DI-VIRTCOM)
Digital Enterprise, Your Way to Industry 4.0 - discover the possibilities. Today's technologies are so complex that training on the software and the appropriate training...
de
DE
|
de
|
DE
|
|
|
Treinamento Online
Remote Communication in Industrial Networks (Online Training) (IK-REMOTES)
Remote communication takes place around the globe. It has been used in the private and office environments for many years, and is now being used more and more often in...
de
DE
|
de
|
DE
|
|
|
Treinamento presencial (externo)
SITRAIN Training for Ecuador (SITRAIN ECUADOR)
The SITRAIN training offering in Ecuador can be found here:
siemens.com/ec/es/productos-y-soluciones/servicios/sitrain.html
- 10 days
en,
es
EC
|
en,
es
|
EC
|
|
|
Treinamento presencial (externo)
SITRAIN Training for Ukraine (SITRAIN UKRAINE)
The SITRAIN training offering in Ukraine can be found here:
siemens.com/ua/uk/kompaniya/navchalnyy-tsentr-sitrain-ukrayina.html
- 10 days
en
UA
|
en
|
UA
|
|
|
Treinamento presencial
SIMATIC S7 Service Training 2 (Face-to-face Training) (ST-SERV2)
You will reinforce your theoretical knowledge through numerous practical exercises on a SIMATIC plant model. This comprises an S7-300 automation system, ET200S...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Remote Communication in Industrial Networks (Face-to-face Training) (IK-REMOTES)
Remote communication takes place around the globe. It has been used in the private and office environments for many years, and is now being used more and more often in...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Additive Manufacturing - Basics (Face-to-Face Training) (TB-ADDM-B)
This course is aimed at employees who want to build a basic knowledge in the field of additive manufacturing technologies (3D printing). By participating, attendees will...
de
DE
|
de
|
DE
|
|
|
Treinamento presencial
SIMIT in Process Automation (Face-to-face Training) (ST-PCS7SIM)
In this face-to-face course you will get to know the software by using the simulation software SIMIT and get an overview of the functions and libraries in the process...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Control Cabinets and Electrical Equipment of Machines for North America (UL508A, NFPA79) (LV-UL-MOD2)
Are you familiar with the strict requirements of North American standards for the design and construction of control cabinets and industrial machines? With this seminar,...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Weighing Technologies, Belt Scales, Weighfeeder (SC-WT-BELE)
Participants get a profound system overview of belt scales and weighfeeders. After the training the participants will be able to start up belt weighing systems, to...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
SIMATIC Programming 2 with SCL in TIA Portal (Face-to-face Training) (TIA-SCL2)
The Totally Integrated Automation Portal (TIA Portal) provides the working environment for end-to-end engineering with SIMATIC STEP 7 and SIMATIC WinCC.
Select this...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
SIMATIC S7 Service Training 1 (Face-to-face Training) (ST-SERV1)
You will reinforce your theoretical knowledge in numerous practical exercises on a SIMATIC plant model. This consists of an S7-300 automation system, an ET200S...
en
DE
|
en
|
DE
|
|
|
Treinamento Online
SINUMERIK PAL-Seminar A - Basics (Online Training) (NC-PAL-A)
Our PAL seminars teach the use of PAL CNC examination controls with a 3D machine room and machining simulation. The CNC training in DIN/ISO code is comprehensively...
de
DE
|
de
|
DE
|
|
|
Treinamento Online
Security Testing in Industrial Networks with SINEC Security Inspector (Online Training) (IC-STINSIP)
Security and reliability of machines are becoming increasingly important in the industrial environment. Access by outsiders or manipulations in the network would have...
de
DE
|
de
|
DE
|
|
|
Treinamento presencial
SIMATIC Programming 3 in TIA Portal (Face-to-face Training) (TIA-PRO3)
The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC STEP 7 and SIMATIC WinCC.
The third part of the...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Security in Industrial Networks with SCALANCE (Face-to-face Training) (IK-SECI-S)
It is difficult to imagine day-to-day industrial operations without Ethernet connections. From large-scale production systems to the smallest Industrial Ethernet...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
SINAMICS G180 - Parameterization and Service (Face-to-face Training) (DR-G180)
In this course you learn the SINAMICS G180 inverter system.
In this course you learn the basics of structure, functionality, commissioning, parameterization,...
en
DE
|
en
|
DE
|
|
|
Treinamento Online
Online-Training - Basics of a Belt Scale (SC-WT-BON)
Participants will get a basic system overview of belt scales. The training includes the selection of the correct installation position, the assembly and explains the...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
VASS V6 Upgrade Workshop for OEM (Face-to-face Training) (CT-VAS6OEM)
The workshop covers the relevant programming topics of the VASS V6 standard, especially what's new since the previous version (V05), as preparation for certification by...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Advanced Switching and Routing in Industrial Networks with RUGGEDCOM (Face-to-face Training) (IK-ASWIROR)
Reliable, performant and robust Industrial Ethernet infrastructures are the backbone of a modern industrial application. At the same time, it is required to connect...
de
DE
|
de
|
DE
|
|
|
Treinamento presencial (externo)
SITRAIN Training for Bulgaria (SITRAIN BULGARIA)
For the SITRAIN training offering in Bulgaria, please get in touch with our local contact:
www.automation.siemens.com/aspa_app?lang=en&q=SITRAIN&comptcid=t&cntryid=bg
-...
bg,
en
BG
|
bg,
en
|
BG
|
|
|
Treinamento Online
SIMATIC Programming 2 with SCL in TIA Portal (Online Training) (TIA-SCL2)
The Totally Integrated Automation Portal (TIA Portal) provides the working environment for end-to-end engineering with SIMATIC STEP 7 and SIMATIC WinCC.
Select this...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Certified WinCC OA Basic Training (WINCCOA BASIC)
This one-week instructor-led course provides trainees with the knowledge and skills necessary to successfully design and build a WinCC OA application. It is the base for...
en
FI
|
en
|
FI
|
|
|
Treinamento presencial
PROFINET System Course (STEP 7 V5.x) (Face-to-face Training) (IK-PNSYS)
Learn about the future-oriented PROFINET as the open Industrial Ethernet standard for automation from Siemens as a member of PROFIBUS International (PI).
Using SIMATIC...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
ULTRAMAT 6 Advanced user (SC-G-ULT6)
Commissioning and operation of ULTRAMAT 6
Diagnostics
infrared absorption
NDIR principle
sample preparation
Service personnel
Commissioning engineers
Configuring...
de
DE
|
de
|
DE
|
|
|
Treinamento presencial
Static Weighing Technology (SC-WT-STAE)
Participants get advanced knowledge on static weighing technology. The main focus is on the electronics modules SIWAREX U, CS, WP231, WP321 and WP521/522 ST. Calibration...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
SIMATIC Service 3 in TIA Portal (Face-to-face Training) (TIA-SERV3)
The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC STEP 7 and SIMATIC WinCC.
The third part of the...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Pneumatics and Electropneumatics - Basics (Face-to-Face Training) (TB-PMEP-B)
In modern manufacturing, tool design, and maintenance, employees are increasingly confronted with electro-pneumatic and pneumatic technologies. This basic course...
de
DE
|
de
|
DE
|
|
|
Treinamento presencial (externo)
SITRAIN Training for Peru (SITRAIN PERU)
The SITRAIN training offering in Peru can be found here:
siemens.com/pe/es/products/servicios/sitrain.html
- 10 days
en,
es
PE
|
en,
es
|
PE
|
|
|
Treinamento presencial (externo)
SITRAIN Training for Thailand (SITRAIN THAILAND)
The SITRAIN training offering in Thailand can be found here:
e-pass.aae.siemens.cloud
- 10 days
th,
en
TH
|
th,
en
|
TH
|
|
|
Treinamento presencial
SINAUT ST7 Training 2020 (Face-to-face Training) (IK-TC-ST7)
Participants will be able to structure, parameterize and start up the SINAUT ST7 telecontrol system.
Programmers
Commissioning Engineers
Engineering...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Optical Identification Technologie and Practice (Face-to-face Training) (ID-OID-TP)
Whether production or logistics, for individualized mass production and the requirements for tracing goods, identification of products is essential. For state-of-the-art...
de
DE
|
de
|
DE
|
|
|
Treinamento presencial
SIMATIC Programming 1 with SCL in TIA Portal (Face-to-face Training) (TIA-SCL1)
The Totally Integrated Automation Portal (TIA Portal) provides the working environment for end-to-end engineering with SIMATIC STEP 7 and SIMATIC WinCC.
Select this...
en
DE
|
en
|
DE
|
|
|
Treinamento presencial
Basics of explosion protection (SC-S-EXBA)
The requirements of the European directives for use in potentially explosive atmospheres are the main topics of the course.
This course teaches you basic knowledge of...
en
DE
|
en
|
DE
|
|
|
Treinamento Online
Online-Training - Basics Grundlagen einer Bandwaage (SC-WT-BON)
Participants will get a basic system overview of belt scales. The training includes the selection of the correct installation position, the assembly and explains the...
de
DE
|
de
|
DE
|
