My Dashboard

Contact Siemens Norway:


Hovedkontor Oslo

Østre Aker vei 88

0593 Oslo


Address:

Postboks 1

0613 Oslo


Phone +47 22 63 30 00

Mobile +46 70 728 1570


Email:

|
  1. Digital Enterprise
  2. DI-VIRTCOM - Description

Corso base SIMATIC S7-1200 (TIA-MICRO1)

  • The Totally Integrated Automation Portal (TIA Portal) for SIMATIC S7-1200 forms the work environment for integrated engineering with SIMATIC STEP 7 Basic and SIMATIC WinCC. In this first part of the SIMATIC S7-1200 training, we teach you the handling of the TIA Portal, basic knowledge about the structure of the SIMATIC S7-1200 automation system, configuration and parameterization of hardware, and the basics of programming. You will learn how to clear simple hardware faults and software errors in the SIMATIC S7-1200 automation system and to create, modify and expand small STEP 7 (TIA Portal) programs. You will thus be capable of reducing downtime. You will also get an overview on operator control and monitoring.

Objectives

  • After attending the course, you can do the following:
    • Understand the fundamentals of the interaction of the SIMATIC S7-1200 with an operator control and monitoring device
    • Reliably operate the TIA Portal engineering platform
    • Create, change, and expand small STEP 7 (TIA Portal) programs
    • Configure, parameterize, and exchange SIMATIC S7-1200 modules
    • Diagnose and fix simple hardware faults using the wiring test
    • Diagnose and fix simple program errors using the status block
    • Perform simple commissioning of the SIMATIC S7-1200
Type Face-to-face training
Duration 3 days
Language it

Target Group

  • Programmers
  • Commissioning engineers
  • Engineering personnel
  • Maintenance personnel
  • Service personnel
  • Operators

Content

  •  
    • Overview and significant performance characteristics of the SIMATIC S7-1200 system family
    • The components of the TIA Portal: SIMATIC STEP 7 Basic and WinCC Basic
    • Program execution in automation systems
    • Binary and digital operations in the diagram ladder (LAD)
    • Setup and assembly of the SIMATIC S7-1200 automation system
    • Addressing and wiring the signal modules
    • Hardware and software commissioning of the SIMATIC S7-1200 with the TIA Portal
    • SIMATIC S7-1200 hardware configuration and parameterization
    • Introduction to the Touchpanel
    • Saving and documentation of the implemented program changes with the TIA Portal

  • Theoretical knowledge will be deepened with numerous practical exercises on a TIA system model. This consists of a SIMATIC S7-1200 automation system, a SIMATIC WinCC Advanced operator control and a conveyor model.

Prerequisites

  • SEP course or equivalent basic knowledge of automation systems.

Note

  • This course is also available in Virtual Classroom mode: E-MICRO1.
  • At the end of the course you can deepen the topics covered through our SIE-learning 4.0: SIE-12TSCB, SIE-12CMS.
  • At the end of this course you can achieve, after an evaluation test, the SITRAIN Italian Certification Program MICRO.

Downloads

check out our Online-Trainings run in other SITRAIN regions:

Search Online-Trainings
Contact