Mijn Dashboard

Training Support Office

Siemens Training Nederland

Contact

Den Haag
Prinses Beatrixlaan 800
2595 BN Den Haag
Zoetermeer
Werner von Siemensstaat 1
2712 PN Zoetermeer
Netherlands

Tel: +31 (0) 70 333 3900
Email:

|
  1. Zoekresultaten

Zoeken

Filter

Kies meer onderwerpen
Naam en Beschrijving Taal Land

Face-to-face-training

SIMOCODE Applicatie Support Training Motormanagement systeem (AST-SIMOC)
SIMOCODE pro engineering, techniek, bedrading, inbedrijfstelling en diagnose. • het doel van deze introductie training van 1 dag is om vertrouwd te raken met de...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC PCS 7 Operator (ST-PCS7OP)
Operators die via een PCS7 OS een proces moeten kunnen bedienen en bewaken . klik hier voor het Leerpad. Operators die via een PCS7 OS een proces moeten kunnen bedienen...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC WinCC OA Open Architecture Basic Course (ST-WCCOABA)
This five day course provides trainees with the knowledge and skills necessary to successfully design and build a WinCC OA application. It is aimed at staff getting...
nl NL
nl NL

Face-to-face-training

SIPROTEC 4 / 5 Distance and transformer differential protections special. (H-SIP45DT)
In this 2-day course, you will learn how to use DIGSI 4 (and DIGSI 5) to implement classical distance protection as a protection function for lines and cables for the...
en, nl NL
en, nl NL

Face-to-face-training

Leerweg: Certified Technician TIA Portal (na Systeemcursus inschrijving) (LW-TEC-S)
Via deze deze leerweg leren service mensen en inbedrijfstellers de kneepjes van het service van de PLC S7-1200 en S7-1500 in TIA Portal. Deze techniciens mogen zich...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC WinCC Unified & Unified Comfort Panels (TIA-UWCCM)
The training is aimed at TIA Portal users of WinCC Unified and Unified Comfort Panels. You will learn the configuration steps. By the end of the course, you will be...
nl NL
nl NL

Face-to-face-training

Starten met Industrial Edge (AST-EDGE)
Ervaring op doen met Industrial Edge door middel van een beperkte scope, moeite en kosten. Je wordt geholpen middels een onderzoek, implementatie en applicatie waar u...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC PCS Process Control Systeem Introductie (ST-PCSINTR)
Eerste kennismaking met het PCS systeem voor een brede doelgroep. Aan de hand van gedetailleerde instructies (hands-on) doorloopt u, na steeds een korte inleiding,...
nl NL
nl NL

Face-to-face-training

Leerweg: Certified Programmer TIA Portal (na Systeemcursus inschrijving) (LW-PRO-S)
Via deze deze leerweg kunnen pprogrammeurs met de S7-1200 en S7-1500 in TIA Portal Siemens Certified Programmer worden als ze na deze modules het eindexamen met goed...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC S7 Inbedrijfstellen / Storingzoeken met TIA Portal (TIA-SERV2)
Inbedrijfstellers en storingsmonteurs kunnen storingen in SIMATIC S7 PLC's met TIA Portal; hardware en software problemen, lokaliseren en op te heffen. U bent bekend met...
nl NL
nl NL

Face-to-face-training

workshop: Hands-on onderhoud: Siemens SINAMICS S120 / S150 (G130/G150) frequentieregelaars (AST-OH120)
Deze workshop biedt een praktische en interactieve benadering om deelnemers vertrouwd te maken met de onderhoudsprocedures en -technieken van de SINAMICS S120 / S150...
nl NL
nl NL

Face-to-face-training

Siemens Motion Control met TIA Portal en T-CPU (TIA-MC)
You will program the SIMATIC S7-1500 or S7-1200 controllers in the TIA Portal. You will be able to precisely control the motion of axes with the integrated motion...
nl NL
nl NL

Face-to-face-training

Cerberus Pro Standaard (BT-CE-BAD)
De training Cerberus Pro standard is bedoeld voor technici die Siemens brandmeld- en ontruimingscentrale van het type Cerberus PRO gaan engineeren, in bedrijf stellen en...
nl NL
nl NL

Face-to-face-training

Basiscursus dag 1 [Theorie] (H-M1)
Module van Power Academy
nl NL
nl NL

Face-to-face-training

Leerweg: Certified Programmer TIA Portal (inschrijving totaal) (LW-PRO-TIA)
Door deze leerweg mogen Programmeurs zich Siemens Certified Programmer noemen als ze na deze modules het eindexamen met goed gevolg hebben afgelegd. We leren ontwerpers,...
nl NL
nl NL

Face-to-face-training

Siemens SINUMERIK ONE Service CNC cursus (NC-ONE-SK)
This course teaches you how to maintain and service a SINUMERIK ONE with operator interface SINUMERIK Operate This course teaches you how to maintain and service a...
en, nl DE, NL
en, nl DE, NL

Face-to-face-training

Siemens SINUMERIK 840D-Solution Line service CNC cursus (NC-84SL-SK)
Onderhoud en service van het CNC Sinumerik 840D SL systeem. (Solution Line) De cursus richt zich tot het service- en onderhoudspersoneel van numeriek gestuurde...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC S7 Systeemcursus 1A+1B met TIA Portal (combicursus) (TIA-PRO1)
In this course you will learn the basics of the Automating system SIMATIC S7 and the Engineering software STEP7, WinCC and TIA portal. All subjects are tested with...
nl NL
nl NL

Face-to-face-training

SIWAREX TIA Portal Applicatie Support Training Wegen en doseren (AST-SIWART)
Kennis van SIWAREX weegprocessoren systeem [1 dag op locatie of in Zoetermeer] Maximaal 4 personen; Engineers/Programeurs/inbedrijfstellers die in de industrieele...
nl NL
nl NL

Face-to-face-training

Leerweg: Certified Technician TIA Portal (inschrijving totaal) (LW-TEC-TIA)
Deze techniciens mogen zich Siemens Certified Technician noemen als ze na deze modules het eindexamen met goed gevolg hebben afgelegd. We leren service mensen en...
nl NL
nl NL

Face-to-face-training

Basiscursus dag 2 [Theorie] (H-M2)
Modulle van Power Academy
nl NL
nl NL

Face-to-face-training

Siemens LOGO! Modbus TCP/IPRTU - RS232/422/485 (LOGO_MODBUS)
Waarschijnlijk heb je wel eens van Modbus gehoord. Het bestaat al sinds 1978 en is voornamelijk bekend van RS232 en RS485. Toch heeft Siemens enige tijd geleden een...
nl NL
nl NL

Face-to-face-training

Siemens SINAMICS S120 met Startdrive,Safety-Integrated, TIA Portal (regelbare aandrijving) (DR-S12-P1T)
After completing the course, the participant will be able to set up a drive with SINAMICS S120 in TIA Portal. The course is intended for commissioning engineers and...
en, nl NL
en, nl NL

Face-to-face-training

Siemens SINAMICS S120 met Starter, Safety-Integrated (regelbare aandrijving) (DR-S12-PM1)
Een aandrijving met SINAMICS S120 op te bouwen met Starter en Safety-Integrated. De cursus is bestemd voor inbedrijfname-, montage- en onderhoudspersoneel. Na het volgen...
nl NL
nl NL

Face-to-face-training

SF6 Certificatietraining conform EU 517/2014 en 2015/2066 (H-SF6)
Raising awareness among participants about the properties of SF6 [Sulfur Hexafluoride] gas and the environmental consequences of its improper use. The practical...
en, nl NL
en, nl NL

Face-to-face-training

Certificatiecursus dag 1 [Theorie] (H-M3TD1)
Module van Power Academy
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC S7 Veiligheid PLC S7-1500F met TIA Portal [Safety Advanced] incl. examen (TIA-SAFETY)
Capabilities of the Failsafe Systems S7-1500F (S7-1200F) with TIA Portal Prerequisites You have the knowledge and skills acquired in the SIMATIC S7 System Course 1A+1B...
nl NL
nl NL

Face-to-face-training

STIPEL examen (H-M7EXAMEN)
Data geplande Stipel examens (examen geen onderdeel van cursusprijs)
nl NL
nl NL

Face-to-face-training

Cerberus Pace standaard (BT-CE-PAC)
Na het volgen van deze training beschikt de deelnemer over alle noodzakelijke theoretische- en praktische kennis om het omroep- en ontruimingssyteem Cerberus Pace te...
nl NL
nl NL

Face-to-face-training

Orientatiedag [Praktijk] (H-M4IP0)
Module van Power Academy
nl NL
nl NL

Face-to-face-training

Desigo CC Eindgebruikers Training (BT-DE-EGT)
Het Siemens gebouwmanagmentsysteem Desigo CC Eindgebruikers training voor gebouwbeheerders. De kandidaat beschikt over eigen Desigo CC gebouwmanagmentsysteem voor het...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC PCS 7 systeemcursus (ST-PCS7SYS)
The engineering process of a SIMATIC PCS 7 project is centralized.The current version of the software used in the course is V9.1. By doing exercises on original SIMATIC...
nl NL
nl NL

Face-to-face-training

Desigo update training ABT Site V5.2 -> V6.0 (BT-DETRAUP)
Na het volgen van deze cursus beschikt de deelnemer over de belangrijkste updates van ABT Site V6.0. Het kunnen programmeren van nieuwe projecten met Desigo ABT Site,...
nl NL
nl NL

Face-to-face-training

Siemens Functionele Veiligheid met TÜV persoonscertificaat (MACH-TUV)
Is die rode noodstopknop op die machine wel afdoende 'veilig'? Hoe ondervang ik fouten in de bekabeling en het besturingscircuit? Heb ik de noodstopfunctie correct...
nl NL
nl NL

Face-to-face-training

Desigo Room Automation ABT Site (BT-DETRASE)
Tijdens deze training wordt de Room Automation Site workflow getraind aan de hand van verschillende praktische oefeningen. Engineers en service engineers van onze...
nl NL
nl NL

Face-to-face-training

Desigo CC Basis Engineering (BT-DE-CCBE)
LET OP! Deze training wordt in het Engels gegeven....
nl NL
nl NL

Face-to-face-training

Desigo PXC 4/5/7 & Control point ABT Site (BT-DE-PXC)
Na het volgen van deze cursus beschikt de deelnemer over alle noodzakelijke theoretische en praktische kennis om de navolgende werkzaamheden uit te voeren. Het kunnen...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC S7 Storingzoeken [Classic] (ST-SERV2)
Inbedrijfstellers en storingsmonteurs kunnen storingen in PLC's, hardware en software, lokaliseren en op te heffen met behulp van STEP7 en S7-300/400 Voorkennis U...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC S7 Systeemcursus 1A+1B [Classic] (ST-PRO1)
Basiskennis van het Automatiseringssysteem SIMATIC S7 PLC "Classic";en de Engineeringssoftware STEP7, WinCC. U weet om te gaan met de SIMATIC Manager voor het beheren...
nl NL
nl NL

Face-to-face-training

STIPEL Vakbekwaam persoon (HS + LS) (H-VP)
The course consists of two modules. The first module, lasting 2 days, covers the topics tested in the STIPEL basic exam, with an emphasis on technical aspects. The...
nl NL
nl NL

Face-to-face-training

Instructie brandmeld- centrale [2x0,5 dag max 2x5 deeln.] (KOD-BIB1)
Na het volgen van deze bedieningstraining beschikt de deelnemer over alle noodzakelijke theoretische en praktische kennis om de brandmeldcentrale te bedienen. De...
nl NL
nl NL

Face-to-face-training

Siemens SIMOCODE Motormanagement systeem (ST-SIMOC)
SIMOCODE pro engineering, technology, wiring, commissioning and diagnostics. This one-day introductory training aims to familiarize participants with the equipment and...
en, nl NL
en, nl NL

Face-to-face-training

STIPEL Installatie- werkverantwoordelijke (HS + LS) (herhaling) (H-IVWV-N)
The course consists of 4 days and covers the topics that are tested in the certification exam. The emphasis is on safety aspects, knowledge of standards and regulations,...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC S7 Systeemcursus 1A met TIA Portal (TIA-PRO1A)
In this course you will learn the basics of the Automating system SIMATIC S7 and the Engineering software STEP7, WinCC and TIA portal. All subjects are tested with...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC S7 Programmeren met TIA Portal (TIA-PRO2)
Ontwerpers, programmeurs en inbedrijfstellers leren de kneepjes van het programmeren van de S7-1200 en S7-1500 PLC in TIA Portal. U bent bekend met de opbouw en de...
nl NL
nl NL

Face-to-face-training

STIPEL Installatie- werkverantwoordelijke (HS + LS) (H-IVWV)
The course consists of two modules. The first module, lasting 2 days, covers the topics tested in the STIPEL basic test, with an emphasis on technical aspects. The...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC S7 Systeemcursus 1B met TIA Portal (TIA-PRO1B)
In this course you will learn to use the maintenance, test and diagnostic tools of the STEP 7 PLC programs. With the explained functions you are able to write, change,...
nl NL
nl NL

Face-to-face-training

Siemens SIMATIC PCS 7 servicecursus (ST-PCS7SR1)
Storingen oplossen en onderhouden van een PCS 7 installatie. Deze training is bedoeld voor diegenen die te maken hebben met storingen oplossen en onderhouden van een PCS...
nl NL
nl NL

Face-to-face-training

Instructie brandmeld- centrale [0,5 dag max 5 deeln.] (KOD-BIB)
Na het volgen van deze bedieningstraining beschikt de deelnemer over alle noodzakelijke theoretische en praktische kennis om de brandmeldcentrale te bedienen De...
nl NL
nl NL

Face-to-face-training

STIPEL Vakbekwaam persoon (HS + LS) (herhaling) (H-VP-N)
The course consists of 4 days and covers the topics that are tested in the certification exam. The emphasis is on safety aspects, knowledge of standards and regulations,...
nl NL
nl NL
10 25 50
Contact