My Dashboard


My Profile

Please use our Support Form for your request.

SITRAIN Customer Information
Tel.: +49 (0)911-895-7575
E-Mail:

Registration Guideline (PDF download)


To find your regional training contact for booking, please click here.

SIMATIC system retraining course for SIMATIC S7-1500 in the TIA Portal (TIA-SYSUP)

Short Description

  • The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with all automation devices – controller, HMI and drives. In this course you will learn about the major differences between SIMATIC S7-300/400 and SIMATIC S7-1500, the engineering tools SIMATIC Manager and TIA Portal, as well as STEP 7 V5.x and STEP 7 based on TIA Portal. You will learn the possibilities of the configuration and the advanced programming of a SIMATIC S7-1500 automation system with the "TIA Portal" engineering platform.

Objectives

  • After attending the course, you can:
    • Efficiently use the "TIA Portal" engineering platform
    • Configure and program components of the SIMATIC S7-1500 automation system with the TIA Portal
    • Perform a commissioning of TIA components
  • You can deepen your theoretical knowledge with numerous practical exercises on a TIA system model. This consists of a SIMATIC S7-1500 automation system, ET200 distributed I/O, Touchpanel, drive, and a conveyor model.
Type Face-to-face training
Duration 5 days
Language en

Target Group

  • Programmers
  • Commissioning engineers
  • Engineering personnel
  • Service personnel

Content

  • Engineering tools TIA Portal components: SIMATIC STEP 7 and SIMATIC WinCC
  • Introduction of the SIMATIC S7-1500 hardware
  • Configuration of devices and networks of the SIMATIC S7 system family using SIMATIC S7-1500 as an example
  • Working with the PLC Tag Table in TIA Portal
  • Program blocks and editor
  • Advanced programming possibilities of a SIMATIC S7-1500
  • Troubleshooting with TIA Portal tools and the SIMATIC S7-1500 CPU display
  • Presentation of the Structured Control Language (SCL) editor
  • Presentation of the SIMATIC WinCC operator control and monitoring system
  • Migration of a SIMATIC STEP 7 V 5.x project to SIMATIC STEP 7 based on TIA Portal
  • Adaption of a SIMATIC S7-300/400 program to the SIMATIC S7-1500
  • Presentation of the 'Startdrive' engineering tool with interfacing to a SINAMICS G120 drive
  • Deeper understanding of contents through practical exercises on the SIMATIC S7-1500 system model

Prerequisites

  • SIMATIC S7 knowledge according to ST-PRO1 and practical experience in using the knowledge
  • You can use the available online entry test to ensure that the selected course matches your area of expertise.
  • This blended learning course combines web-based training (WBT) on the Internet with a 5-day attendance course: To prepare for the attendance course, you will receive the WBT "PROFINET" and "Industrial Ethernet". This allows you to improve your personal learning achievement in the attendance course.

Note

  • In this course you will work with SIMATIC S7-1500 and software SIMATIC STEP 7 based on TIA Portal – for the SIMATIC S7-1200 we offer our TIA-MICRO1/2 courses.

Downloads