My Dashboard


+86 400 810 4288 dial 4

SIMATIC TIA Portal system retraining course for SIMATIC S7-1500 / SIMATIC S7-1500 与TIA Portal(TIA 博途)升级课程 (A7816)


  • The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with all automation devices – controller, HMI and drives. In this course you will learn about the major differences between SIMATIC S7-300/400 and SIMATIC S7-1500, the engineering tools SIMATIC Manager and TIA Portal, as well as STEP 7 V5.x and STEP 7 based on TIA Portal. You will learn the possibilities of the configuration and the advanced programming of a SIMATIC S7-1500 automation system with the "TIA Portal" engineering platform. You can deepen your theoretical knowledge with numerous practical exercises on a TIA system model. This consists of a SIMATIC S7-1500 automation system, ET200 distributed I/O, Touchpanel, drive, and a conveyor model. After attending the course, you can: Efficiently use the "TIA Portal" engineering platform; Configure and program components of the SIMATIC S7-1500 automation system with the TIA Portal; Perform a commissioning of TIA components.
Type Face-to-face training
Duration 5 days
Language zh

Target Group

  • programmers, commissioning engineers, configuring engineers, service personnel, operators, users, maintenance personnel


  • Engineering tools TIA Portal components: SIMATIC STEP 7 and SIMATIC WinCC
  • Introduction of the SIMATIC S7-1500 hardware
  • Configuration of devices and networks of the SIMATIC S7 system family using SIMATIC S7-1500 as an example
  • Working with the PLC Tag Table in TIA Portal
  • Program blocks and editor
  • Advanced programming possibilities of a SIMATIC S7-1500
  • Troubleshooting with TIA Portal tools and the SIMATIC S7-1500 CPU display
  • Presentation of the SIMATIC WinCC operator control and monitoring system
  • Migration of a SIMATIC STEP 7 V5.x project to SIMATIC STEP 7 based on TIA Portal
  • Integrating and Commissioning a Drive with Startdrive
  • Introduction of S7-SCL
  • Introduction of S7-Graph
  • Deeper understanding of contents through practical exercises on the SIMATIC S7-1500 TIA system model


  • Basic knowledge of automation technology, S7-300/400 PLC programming


7,800 CNY